The PIEPS PRO BT is the most advanced beacon, with a feature set built for the pro user.

Maximum circular receiving range
of 60 m for quick and stable initial signal.

Battery lifetime
min. 600 h in SEND-mode with Lithium batteries.

Wireless device management
via Bluetooth and PIEPS-APP.
- EXTENSIVE SELF-CHECK
Review of all relevant hardware and software elements as well as showing the current software version.
- PERFECTLY READABLE DISPLAY
in all lighting conditions
- VIBRATION
at initial signal detection. This lets rescuers focus on the visual surface search during the signal search.
- PERFECT MARK-PERFORMANCE
due to exact signal processing without any performance losses
- PIEPS INTERFERENCE PROTECTION
The influence of external interferences is eliminated or reduced to a minimum:
Protection in send mode with Auto-Antenna-Switch: If the transmitting antenna is impacted by external interference, the other antenna would take over the transmit function.
Protection in search mode with Signal Verification: Only a verified 457kHz signal is indicated.
- iPROBE SUPPORT
The PIEPS PRO BT can be temporarily deactivated using the smart iPROBE. The receiving beacon automatically receives the next strongest signal.
- BACKUP-MODE
The PIEPS PRO BT is in send mode but the send signal is temporarily suppressed. So rescuers aren't disturbed during the search.
- AUTO-SEARCH-TO-SEND
This function automatically switches the PIEPS PRO BT from search mode to send mode, if the beacon is not moving for a certain time (in case of burial).
- GROUP CHECK
Reviews the activity and transmission parameters of the partner device. PIEPS recommends to perform a group check before each tour.
- SCAN-FUNCTION
The SCAN-function will give you an overview of all buried devices within the detectable range.
- VICTIM SELECTION
The PIEPS PRO BT scans the entire receiving range. The closest 3 victims are indicated.
- ANALOG-MODE
The analog mode can be used for specific search strategies as well as for demo reasons.
- TX600-SUPPORT
The PIEPS TX600 is a mini-transmitter for dogs and equipment that is transmitting out of the standard EN300718 and can be received with every PIEPS PRO BT.
- INCLINOMETER
With the integrated three dimensional inclinometer the the punctual angle of the slope can be measured.
- CARRYING SYSTEM PIEPS PRO BT
High wearing comfort at low weight
Neoprene pouch with soft shoulder strap
Quick-Pull-System for fast access to the device
- SECURE SLIDER SWITCH MECHANISM
The switching from one position to another (OFF-SEND-SEARCH) is only possible with a secure 2-hand-activity. The two operating elements lock button (1) and slider (2) have to be forced at the same time and in different directions - only then a switching of the positions is possible.
Manual Download
PRO BT/POWDER BT Manual DEPRO BT/POWDER BT Manual ENPRO BT/POWDER BT Manual CZPRO BT/POWDER BT Manual ESPRO BT/POWDER BT Manual FIPRO BT/POWDER BT Manual FRPRO BT/POWDER BT Manual HRPRO BT/POWDER BT Manual ITPRO BT/POWDER BT Manual JPPRO BT/POWDER BT Manual NLPRO BT/POWDER BT Manual NOPRO BT/POWDER BT Manual PLPRO BT/POWDER BT Manual RUPRO BT/POWDER BT Manual SEPRO BT/POWDER BT Manual SKPRO BT/POWDER BT Manual SLBest advice when buying your avalanche emergency equipment in one of our PIEPS Service Center.