PIEPS
MICRO BT sensor
The PIEPS MICRO BT sensor is the most intuitive beacon that switches automatically from send mode to search mode.

WIRELESS DEVICE MANAGEMENT
via Bluetooth and PIEPS-APP.

SENSOR TECHNOLOGY
switches automatically from send mode to search mode.

VIBRATION
at initial signal detection. This lets rescuers focus on the visual surface search during the signal search.
- MAXIMUM CIRCULAR RECEIVING RANGE
due to the PIEPS 3-antenna-system.
- EXTENSIVE SELF CHECK
Review of all relevant hardware and software elements as well as showing the current software version.
- BIG DISPLAY
for easy readability.
- PERFECT MARK-PERFORMANCE
due to exact signal processing without any performance losses.
- PIEPS INTERFERENCE PROTECTION
The influence of external interferences is eliminated or reduced to a minimum:
Protection in send mode with Auto-Antenna-Switch: If the transmitting antenna is impacted by external interference, the other antenna would take over the transmit function.
Protection in search mode with Signal Verification: Only a verified 457kHz signal is indicated.
- iPROBE SUPPORT
The PIEPS MICRO BT sensor can be temporarily deactivated using the smart iPROBE. The receiving beacon automatically receives the next strongest signal.
- AUTO-SEARCH-TO-SEND
This function automatically switches the PIEPS MICRO BT sensor from search mode to transmit mode, if the beacon is not moving for a certain time (in case of burial).
- GROUP CHECK
Reviews the activity and transmission parameters of the partner device. PIEPS recommends to perform a group check before each tour.
- CARRYING SYSTEM PIEPS MICRO BT sensor
Hard case
Water-repellent materials
Compact hard case so the sensor is covered reliably
Maximum range (m):
50
Search strip width (m):
50
Dimensions (mm, LxWxH):
106 x 74 x 20
Weight (g, incl. batteries):
150
Power supply:
1 battery (AA)
Battery lifetime (min. h)
:
200
Transmission frequency (kHz, according to EN300718):
457
Temperature range:
-20°C to +45°C
Latest firmware:
v3
Bluetooth:
yes
Update possibility to latest firmware:
yes